|ARTIST SERIES j2 EXTERNAL PREAMP
Absolutely no corners were cut while developing this system.
This high quality boutique grade unit is constructed with the
finest components available today.
The j2 preamp was constructed from the ground up to be a
excellent compliment to our pickup systems. It was designed to
introduce no coloration of tone to your signal chain. This will
also work very well with any other brand of pickup on the
market. These work exceptionally well wherever a clean boost is
needed. Electric guitars are no exception.
The JJB Electronics j2 Preamp is designed to convert the high
impedance of piezo transducers into a low impedance line level
signal that is suitable for driving the inputs of mixers, amplifiers,
and recording interfaces. The j2 also makes long cable runs
possible without loss of frequency response or reduced signal
levels. The j2 restores the frequency response of your
instrument, giving punch and clarity to passive transducer
The j2 Preamp has several features to allow you to get the most
natural tone from your instrument when amplified. It is designed
to have transparent performance with very low noise or
coloration of your tone.
1 Meg Ohm input impedance.
Ultra low output impedance < 4.7k Ohms.
0-20db of clean gain.
Dedicated pure bypass foot switch.
Top mounted controls for Volume and Gain.
No signal distortion
No tone coloration
No phase reversal
Recommended AC adaptor: 9V (100ma)
9V battery not included
One year warranty from defects
|MADE WITH PRIDE IN
THE USA, SHIPPED FOR
FREE TO THE USA